Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
2C6105 | ADAPTER DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D27604001000 | ADAPTER DRIVE | 20 | |
98D27804001000 | ADAPTER DRIVE | 28 | |
C52008-1 | Adapter Drive | 19 | |
HS6711 | ADAPTER DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-1 | ADAPTER DRIVE | 8 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
(CALIB) 98A27808003001 | DRIVE ADAPTER (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
00711095M | TORQUE SCREWDRIVER ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
0AT-2193 | OUTLINE ADAPTER SQUARE DRIVE CLUTCH SET RUN IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1206 GS | Square Drive Adapter | 5 | |
1206GS | COMBINATION DRIVE ADAPTER SET | 5 | |
14PF465 | ADAPTER, DRIVE TOOL SPLINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
14PF465T00L | ADAPTER FLAP DRIVE FEMALE SPLINE | 7 | |
14PF465TOOL | FLAP/SLAT DRIVE ADAPTER (FEMALE) | 7 | |
14PF465TOOL-M | ADAPTER FLAP/SLAT DRIVELINE − MALE SPLINE | 4 | |
14PF465TOOLM | ADAPTER FLAP/SLAT DRIVELINE - MALE SPLINE | 4 | |
14PF465TOOL−M | FLAP/SLAT DRIVE ADAPTER (MALE) | 4 | |
15MIT65B00717 | MANUAL DRIVE ADAPTER | 4 | |
17PF465TOOL | FEMALE SPLINE ADAPTER, FLAP SLAT DRIVELINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
196K8004 | ADAPTER, FLEX DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
196K8004 REV B | ADAPTER, FLEX DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1AX65 | 3/4 TO 1 INCH DRIVE ADAPTER | 1 | |
1C8033 | ADAPTER - DRIVE-SPLINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8208 | ADAPTER - DRIVE-GAS GENERATOR INSPECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8208 REV C | ADAPTER, DRIVE - GAS GENERATOR INSP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8208G02 | SPLINE, ADAPTER, MANUALFRONT DRIVE PAD | 1 | |
1C9609 | ADAPTER ASSY, DRIVE-REAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9609G01 | ADAPTER ASSEMBLY DRIVE REAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
21C32739G003 | ADAPTER MFC DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
21WM79 | WESTWARD IMPACT SOCKET ADAPTER: 1 IN INPUT DRIVE SIZE, BLACK OXIDE, 3/4 IN OUTPUT DRIVE SIZE, SQUARE | 1 | |
2344-0052-09 | CALIB DRIVE ADAPTER PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
250B 1/4 | ADAPTER, 1/4" HEX TO 1/4" SQUARE DRIVE | 1 | |
2571005-001 | ADAPTER, DRIVE, ANTI-SKID TRANSDUCER | 1 | |
269T9211-003 | DRIVE SHAFT COUPLING ADAPTER SPANNER WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
27-1-4324 | ADAPTER-CLUTCH TORQUE, FLAP DRIVE UNIT | 2 | |
27.1-4324 | ADAPTER-CLUTCH TORQUE FLAP DRIVE UNIT F50 | 2 | |
27660-S52-1 | TORQUE DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
287574-1 | OVERSPEED DRIVE ADAPTER | 1 | |
291615-1 | ADAPTER ASSY ALTERNATOR PLUG DRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-010A | ADAPTER HIGH TORQUE 3/8 DRIVE | 1 | |
291B300-015A | ADAPTER HIGH TORQUE 3/8 DRIVE | 1 | |
294891-1 | DRIVEN COMPRESSOR HOLDER ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294927-1 | DRIVEN COMPRESSOR REMOVAL HOISTING ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14900G01 | ADAPTER, BALANCE-STAGE 2 COMPRESSOR DRIVE | 1 | |
2C14906G01 | PULLER, DRIVE ADAPTERS ‐ ROTOR BALANCING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14907G01 | DRIVE ADAPTER, BALAN | 1 | |
2C14908G01 | DRIVE ADAPTER, BALANCE ‐ HPCR ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14922G02 | ADAPTER, BALANCE LPT MODULE, BELT DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C5693G01 | ADAPTER, ACCESSORY DRIVE GEARBOX HOIST | 1 | |
2C6105 | ADAPTER,DRIVE-TURBINE REVERSER GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6105P01 | ADAPTER DRIVE; ANGLE GEARBOX | 1 | |
2C6888G03 | ADAPTER, BALANCE-STAGE 2 COMPRESSOR DRIVE AND BLAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81046G01 | ADAPTER, LPT-TO-FAN DRIVE SHAFT | 2 | |
2C81103 ADA | ADAPTER - TORQUE - LOCKNUT - FAN TO FAN DRIVESHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81464G01 | ADAPTER TORQUE HPTLOCKNUT FAN DRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81970G01 | BALANCE DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91074G01 | ADAPTER - FAN DRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2ED00190 | ENG DRIVE MOTOR ADAPTER | 1 | |
2MIT65B40719 | ADAPTER, OIL FILL - CONSTANT SPEED DRIVE (CSD) | 2 | |
2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
2TE65B80562 | TEST ADAPTER - DRIVE MECHANISM, STABILIZER TRIM | 1 | |
3400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER DRIVE TOOL | 1 | |
3791182-1 | STARTER DRIVER QAD ADAPTER | 1 | |
3SF3238-27-52N | FLAP TORQUE TUBE DRIVE ADAPTER | 1 | |
4213 | 1 X 3/4 DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
427-240-105-101 | WRENCH ADAPTER TR DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4MIT65B00732 | ADAPTER SOCKET DRIVE | 2 | |
53-540AK | DRIVE ADAPTER KIT | 1 | |
55315A21 | ADAPTER; SQUARE DRIVE, BLACK, 3/8 | 1 | |
5610A2 | TORQUE DRIVER SOCKET ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
582-520 | DRIVE SOCKET ADAPTER 3/8-1/4 INCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5MIT65B81129 | ADAPTER ASSEMBLY - TORQUE WRENCH INBOARD TRAILING EDGE FLAP DRIVE, INBOARD TRANSMISSION | 2 | |
60G2756004N001 | SPLINED FLAP DRIVE ADAPTER (GAC GSE 2720570) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
624A080-A | RAT DRIVES THE MOTOR ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
649500_6 | ADAPTER 1/2"-3/4" DRIVE STAHLWILLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
68060-AM1C-27 | AIR DRIVEN GENERATOR TEST ADAPTER P/N SPL-11921 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7229A42 | BIT ADAPTER FOR RATCHET WRENCHES WITH RING, 1/4" SQUARE DRIVE SIZE, FOR 1/4" BIT HEX SHANK | 1 | |
7229A44 | BIT ADAPTER FOR RATCHET WRENCHES WITH RING, 3/8" SQUARE DRIVE SIZE, FOR 1/4" BIT HEX SHANK | 1 | |
730N/40 | WRENCH TORQUE STEEL SINGLE END 14X18MM; M END DRIVE W/SQUARE LOCATION FOR ADAPTER; NSN 5120123699145 | 2 | |
7787 | SQUARE DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
77200 | DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
163563 | ADAPTER-DRIVE SPLINES FUEL PUMP ROTATION CHECK | 1 | |
280985 | HOLDER - DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
298496 | Driver, Installation, Spline Adapter | 1 | |
484814 | SCREW DRIVER WITH PIN ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1006767 | 3/8” DRIVE TORQUE ADAPTERS | 1 | |
2557759 | Drive Pad Adapter | 1 | |
2561513 | ADAPTER, POWER ARM (DRIVE BODY) | 2 | |
2566448 | Drive Pad Adapter | 1 | |
3938033 | TORQUE ADAPTER (1/2 INCH DRIVE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3938068 | TORQUE ADAPTER (1/2 INCH DRIVE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796694 | ADAPTER, STAND, ACCESSORY DRIVE HOUSING | 2 | |
6799790 | Adapter-Engine Turning, Spare Hydarulic Drive | 3 | |
13030005 | ADAPTER 1/2"-3/4" DRIVE STAHLWILLE | 2 | |
23052530 | ADAPTER, POWER-UNIT ACCESSORY-DRIVE STARTER-SHAFT DRIVE | 2 | |
23060606 | Adapter – Drive Dog, Compressor Rotor Grind | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
50181040 | WRENCH TORQUE STEEL SINGLE END 14X18MM; M END DRIVE W/SQUARE LOCATION FOR ADAPTER; NSN 5120123699145 | 1 | |
58521087 | ADAPTER SQUARE DRIVE 1/4" INTERNAL 3/4" EXTERNAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
58521088 | ADAPTER SQUARE DRIVE 3/8" INTERNAL 3/4" EXTERNAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
58523089 | SQUARE DRIVE ADAPTER | 1 | |
58524089 | 7789-3-SQUARE DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
59010005 | ADAPTER SQUARE DRIVE 1/2" TO 3/8" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
75221185 | TORQUE ADAPTER 11/16" SPLINE DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7789-2 | SQUARE DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7789-3 | SQUARE DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
835404-1 | STARTER DRIVE QAD ADAPTER | 1 | |
856A1523 | ADAPTER, DRIVE - AGB CRANK PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1523P01 | ADAPTER, DRIVE-AGB CRANK PAD (MANU | 2 | |
856A1815 | ADAPTER, MANUAL DRIVE PAD, CORE ENGINE ROTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1815G02 | MANUAL DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1815G06 | ADAPTER, MANUAL DRIVE PAD, CORE ENGINE ROTATION | 2 | |
856A1823 | ADAPTER, DRIVE - AGB CRANK PAD CFM56-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2985 | DRIVE ADAPTER-BOOSTER/LPT SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2985G01 | DRIVE ADAPTER-BOOSTER/LPT SHAFT | 4 | |
856A2991 | DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3455G01 | DRIVE ADAPTER | 2 | |
856A3468G01 | ADAPTER, DRIVE - FWD LPT SHAFT BALANCING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3471 | DRIVE SPLINE ADAPTER FUEL PUMP | 1 | |
856A3471P01 | ADAPTER - DRIVE SPLINES FUEL PUMP ROTATION CHECK | 4 | |
856A3471P02 | ADAPTER-DRIVE SPLINE, FUEL PUMP P01 IS U.S. CONFIG., P02 IS EUROPEAN CONFIG. & ALTERNATE. (CFM INTERNATIONAL INC. - GE SUPPORT SERVICES) | 12 | |
856A3515G04 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT (TOOL SET) | 9 | |
856A3524 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT (TOOL SET) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3524 G01 | Tool Set Drive Adapter ‐ Booster and LPT | 14 | |
856A3524G01 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT | 14 | |
856A3810G01 | ADAPTER, AIR DRIVE - DRY OUT ENGINE SUMPS | 10 | |
856A3901G01 | ROTATION ADAPTER - CORE DRIVE PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
85750700-001-89 | ADAPTER, FLAP DRIVE | 2 | |
882700AT5 | SOCKET DRIVE (TORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2042 | ADAPTER, DRIVE - BALANCE, HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9471M48P01 | ADAPTER. TURN-CORE (MANUAL DRIVE | 5 | |
956A1610P01 | DRIVE ADAPTER - CORE ENGINE ROTATION | 3 | |
956A2610P01 | AGB DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6241 | DRIVE SPLINE ADAPTER - TGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6288 | DRIVE SPLINE ADAPTER - AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8931 | ADAPTER - DRIVE SPLINES - GEAR - TGB/AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27508013000 | ADAPTER DRIVE (FLAP) | 15 | |
98A27508061000 | ADAPTER-FLAP DRIVE SHAFT,WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27508062000 | ADAPTER - FLAP DRIVE SHAFT LH-RH WING | 2 | |
98A2758062000 | Adapter Flap Drive | 1 | |
98A27808003000 | Adapter fuer torque shaft drive tool-24 teeth | 3 | |
98A27808003001 | ADAPTER FUER TORQUE SHAFT DRIVE TOOL-25 TEETH | 14 | |
98D-278-04001-000 | ADAPTER, SLAT DRIVE | 28 | |
98D27804001000 | FLAP DRIVE ADAPTER | 28 | |
98D2780401000 | Flap Drive Adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F27808212000 | ADAPTER DRIVE (PCU) | 10 | |
98F32104022000 | DRIVE ADAPTER | 2 | |
98F49208240000 | ADAPTER - TORQUE (SQUARE DRIVE 1-2, HEX SIZE 9-16 IN) | 10 | |
98F49208240001 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | 12 | |
98F49209001000 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | 5 | |
98L24209005000 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98S27003002000 | ADAPTER, TRIM ACTUATOR MANUAL DRIVER | 11 | |
98S27003002000-ST | TRIM ACTUATOR MNL DRIVER ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98S61005002000 | WRENCH TORQUE PROPELLER (1/2” DRIVE ADAPTER & 11/16” SOCKET) | 5 | |
99-8107-6000 | ADAPTER-RIGHT ANGLE DRIVE | 5 | |
9C2177 | ADAPTER DRIVE HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A0110284 | DRIVE BLOCKS ADAPTER EXTRACTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A24011-1 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 13 | |
A240111 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 13 | |
A27004 | HOIST ADAPTER L.E. SLAT DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27004-1 | ADAPTER HOIST DRIVE | 3 | |
A27004-2 | Hoist Adapter -Leading Edge Slat Drive | 4 | |
A27035-1 | SCREWDRIVER – ADAPTER RUDDER/ELEVATOR FEEL ACTUATOR CYLINDER | 3 | |
A27062-10 | Drive Adapter Assembly | 1 | |
A27072-31 | DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27077-1 | DRIVE ADAPTER SLAT | 7 | |
A27078-7 | SPLINE ADAPTERS - LEADING EDGE SLAT DRIVE ROTARY ACTUATORS AND GEARBOXES | 1 | |
A27102-7 | ADAPTER - LE SLAT and TE FLAP, MANUAL DRIVE | 14 | |
A27102-8 | ADAPTER - LE SLAT and TE FLAP, MANUAL DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A29001 | HOIST ADAPTER AIR DRIVEN HYDRAULIC PUMP | 1 | |
A29001-1 | Hoist Adapter -Air-Driven Hydraulic Pump | 6 | |
A29001-19 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 3 | |
A29001-20 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 2 | |
A2A | ADAPTER, 3/8" INTERNAL DRIVE X 1/2" EXTERNAL DRIVE | 4 | |
A342 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A71013 | Hoist Adapter -Integrated Drive Generator (Idg) (Repl. By G24012) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A71013 REV F | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A71013-19 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 6 | |
A71013-32 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 5 | |
A71013-40 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 5 | |
A71013-45 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 5 | |
A71013-55 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 5 | |
A71013-82 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 8 | |
A71013-88 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A78026 | ADAPTER - SQUARE DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A78026-1 | ADAPTER - SQUARE DRIVE | 1 | |
AGE-00586-001 | ADAPTER,DRIVE FLAP | 5 | |
AGE11714 | ADAPTER ASSEMBLY, BACKDRIVE INSEP. | 2 | |
AGE17073 | ADG BACKDRIVE ADAPTER | 3 | |
AM24562 | DRIVE BLOCK EXTRT ADAPTER | 3 | |
ART0020711 | OMNIDRIVE USB LF PCMCIA CARD ADAPTER | 4 | |
AT5098 | DRIVE ADAPTER | 1 | |
B27052-7 | DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B71024-2 | 1/2" drive long socket adapter | 1 | |
B71024-3 | 1/2"DRIVE SHORT SOCKET ADAPTER | 2 | |
B71024-37 | 3/4" DRIVE LONG SOCKET ADAPTER | 1 | |
B71024-38 | 3/4" drive short socket adapter | 1 | |
BAWA-6 | EMB 170-175 MLG AXLE NUT ADAPTER 3" - 6 POINT. DRIVE 3/4" | 1 | |
BLP73BIT-50 | HEX DRIVE TO 1/4 DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BLP73BIT-51 | HEX DRIVE TO 3/8 DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BLP73BIT-52 | HEX DRIVE TO 1/2 DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BLPTMBS3814 | ADAPTER 1/4" TO 3/5" DRIVE | 3 | |
BT-D-0622 | Adapter - 1/4" Female Socket to 3/8" Male Drive | 1 | |
BT-DAB | Drive Adapter Block | 1 | |
C24002-31 | JACK ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) AND INTEGRATED DRIVE GENERATOR (IDG) | 1 | |
C24002-39 | JACK ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) AND INTEGRATED DRIVE GENERATOR (IDG) | 3 | |
C24002-40 | JACK ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) AND INTEGRATED DRIVE GENERATOR (IDG) | 5 | |
C24002-41 | JACK ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) AND INTEGRATED DRIVE GENERATOR (IDG) | 7 | |
C24002-45 | JACK ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) AND INTEGRATED DRIVE GENERATOR (IDG) | 2 | |
C24002-77 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 14 | |
C24002-78 | JACK ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) AND INTEGRATED DRIVE GENERATOR (IDG) | 16 | |
C32014-5 | DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CCM150I | WRENCH,TORQUE;?M;30.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;AUDIBLE AND FEEL IMPULSE;SINGLE END EXTERNAL DOVETAIL; STEEL;?M END DRIVE,W/SQUARE LOCATION FOR ADAPTER,TORQUE WRENCH;|9.000";2.00 INCH-POUNDS;PLAIN HEAD;RUBBER GRIP HANDLE; CH | 1 | |
DSR2037-10 | ADAPTER 3/8 IN. SQ. DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DSR2037-14 | ADAPTER 3/8 IN. SQ. DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DSR2037-15 | ADAPTER 3/8 IN. SQ. DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DSR2039-8 | ADAPTER 3/8 IN. SQ. DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DSR2041-2 | ADAPTER 1/2 IN. SQ. DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DSR2041-4 | ADAPTER 1/2 IN. SQ. DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ0011-505 | Adapters-outbd slat drive & aileron actuator hoisting | 1 | |
E0006 | Adapter Gearbox Drive Shaft | 1 | |
E0013 | Grease Gun Adapter Gearbox Drive Shaft | 1 | |
ETOR.101 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | 2 | |
ETOR.102 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EX250-B/G | ADAPTER, 1/4" HEX TO 1/4" SQUARE DRIVE | 1 | |
F-70300-1 | FLAP DRIVE ADAPTER | 24 | |
F1401218 | ADAPTER FOR TORQUE SCREWDRIVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70067 | ADAPTER -0 SPLINED SHAFT,INBD.FLAP DRIVE USED TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70068 | ADAPTER -0 THRUST REVERSER WRENCH USED TO DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70300-1 | FLAP TORQUE TUBE SLPINE DRIVE ADAPTER | 24 | |
F70300-1-M | FLAP DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F703001 | FLAP DRIVE ADAPTER ASSY | 24 | |
F7033-1 | Adapter - Constant Speed Drive and AC Generator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F7033-21 | Adapter - Constant Speed Drive and AC Generator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F7033-24 | Adapter - Constant Speed Drive and AC Generator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F7033-25 | Adapter - Constant Speed Drive and AC Generator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70333 | ADAPTER-CONSTANT SPEED DRIVE&A.C GENERATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70333-1 | ADAPTER CONSTANT SPEED DRIVE | 2 | |
F70333-21 | GENERATOR AND CONSTANT SPEED DRIVE ADAPTER | 1 | |
F70333-24 | ADAPTER, CONSTANT SPEED DRIVE AND AC GENERATOR WIT | 11 | |
F70333-25 | ADAPTER - CONSTANT SPEED DRIVE & A.C. GENERATOR | 8 | |
F71206 | ADAPTER ASSY -0 AC GENERATOR/DRIVE MOUNT. USED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72863-1 | GENERATOR AND CONSTANT SPEED DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72863-2 | GENERATOR AND CONSTANT SPEED DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80011-1 | CRADLE ADAPTER ASSEMBLY – AC GENERATOR AND CONSTANT SPEED DRIVE | 4 | |
F80011-16 | CRADLE ADAPTER ASSEMBLY - AC GENERATOR AND CONSTANT SPEED DRIVE | 3 | |
F80122-1 | Adapter Flap Drive Transmission | 1 | |
F80122-11 | ADAPTER EQUIPMENT - TORQUE WRENCH, FLAP DRIVE TRANSMISSION | 2 | |
F80122-12 | ADAPTER EQPT - TORQUE WRENCH, FLAP DRIVE TRANSMISSION | 4 | |
F80122-13 | ADAPTER EQUIPM. - TORQ. WRENCH FLAP DRIVE TRANSMISSION | 2 | |
F80122-14 | ADAPTER EQUIPMENT TORQUE WRENCH FLAP DRIVE TRANSMISSION | 11 | |
F80122-15 | ADAPTER EQPT - TORQUE WRENCH, FLAP DRIVE TRANSMISSION | 10 | |
F80122-16 | ADAPTER EQUIPMENT TORQUE WRENCH FLAP DRIVE TRANSMISSION | 10 | |
F80122-4 | Adapter Flap Drive Transmission | 5 | |
F80122-XX | Adapter Equipment -Torque Wrench. Flap Drive Transmission | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FLAP DRIVE ADAPTER | FLAP DRIVE ADAPTER TOOL | 1 | |
FRDH101 | DRIVE TORQUE ADAPTER R 3/8 - 5/16 | 3 | |
FRDH121 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 3/8" | 2 | |
FRDH141 | TORQUE ADAPTER 7/16, DRIVE 3/8 | 12 | |
FRDH161 | TORQUE ADAPTER 1/2 - 3/8" DRIVE 12-POINT SAE 1/2" STANDARD TORQUE ADAPTER | 2 | |
FRDH181 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 9/16" | 3 | |
FRDH201 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 5/8" | 1 | |
FRDH241 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 3/4" | 1 | |
FRDH301 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 15/16" | 1 | |
FRES10 | 3/8"DRIVE-5/16" TORQUE ADAPTER 2 EA | 4 | |
FRES12 | 3/8"DRIVE-3/8" TORQUE ADAPTER 2 EA | 6 | |
FRES14 | 3/8"DRIVE-7/16" TORQUE ADAPTER 2 EA | 6 | |
G24012 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 2 | |
G24012-1 | Hoist Adapter -Integrated Drive Generator (Idg) | 11 | |
G27011-1 | SPLINE ADAPTER - TORQUE SENSOR, INBOARD AND OUTBOARD TRAILING EDGE FLAP DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27020-1 | SPLINE ADAPTER - OUTBOARD TRANSMISSION, INBOARD TRAILING EDGE FLAP DRIVE | 2 | |
G27034 | SPLINE ADAPTER -0 ANGLE GEARBOX DRIVE, INBD TE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27034-1 | Spline adapter-angle gearbox drive inbd te flap | 1 | |
G27056-1 | HOIST ADAPTER -POWER DRIVE UNIT. OUTBOARD TRAILING EDGE FLAP (CE) | 3 | |
G27091-1 | SPLINE ADAPTER, ANGLE GRARBOX DRIVE | 5 | |
G601R242300-1 | ADG BACKDRIVE ADAPTER | 1 | |
G71021-16 | MANUAL DRIVE ADAPTER | 15 | |
GFAT1E | DRIVE ADAPTER 3/8'' TO 1/4'' | 4 | |
GLA12B | ADAPTER, 1/2" INTERNAL DRIVE X 3/4" EXTERNAL DRIVE | 5 | |
GLA72A | SnapOn 3/4- 1" Drive Ind Finish Socket Extension Adapter | 4 | |
GLAS1E | ADAPTER, 3/4" INERNAL DRIVE X 1/2" EXTERNAL DRIVE | 4 | |
GR000066 | DRIVE BLOCK ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS11995 | SCREWDRIVER ADAPTER | 1 | |
GS18283-1 | ADAPTER SCREW DRIVER | 6 | |
GS19968-1 | ADAPTER, SCREW DRIVER | 1 | |
GS19969-1 | ADAPTER, SCREW DRIVER | 1 | |
GS20398-1 | ADAPTER, DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS21024-1 | ADAPTER, CONTROL DRIVE | 1 | |
GSAF1E | ADAPTER, HARDENED, 1/2" INTERNAL DRIVE X 3/8" EXTERNAL DRIVE | 5 | |
GSAF1F | ADAPTER, STEP DOWN 1/2" DRIVE TO 3/8" DRIVE | 4 | |
GSB2750001 | ADAPTER-RIGHT ANGLE DRIVE | 1 | |
GSB2750003 | FLAP DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE 064 | ADAPTER,DRIVE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE2720570 | SPLINED FLAP DRIVE ADAPTER KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GTA3 | SQUARE DRIVE ADAPTER 1/4@3/8 | 2 | |
HRR487 | DRIVE ADAPTERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS8283 | SCREWDRIVER ADAPTER | 1 | |
HS9568 | ADAPTER DRIVE PUMP MOT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HTN-B-3 | INTERCHANGEABLE TOOL CALLED SCREWDRIVER ADAPTER | 3 | |
HU28707 | End-drive adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J.230 | DRIVE ADAPTER | 1 | |
J.232 | DRIVE ADAPTER | 5 | |
J24002-73 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (PW/GE/RR ENGINES) | 7 | |
J24018-1 | Hoist adapter-IDG (Integrated drive gene | 7 | |
J270021-1 | FLAP DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27003-1 | DRIVE ADAPTER – TORQUE TUBE COUPLING, LEADING EDGE SLAT | 9 | |
J27003-2 | DRIVE ADAPTER -TORQUE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27015-1 | SPLINE ADAPTER - LE/TE PWR DRIVE UNIT, MAN DRIVE | 7 | |
J27021-1 | Adapter - Drive, T.E. Flap Torque Tube Coupling | 10 | |
J27061-6 | DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27078-1 | Drive Adapter Equipment -Actuator. Horizontal Stabilizer Trim | 10 | |
J27108-1 | DRIVE ADAPTER - DRIVE LINE COUPLING, FLAP AND SLAT | 1 | |
J27108-13 | DRIVE ADAPTER – T.E. FLAP TORQUE TUBE COUPLING | 1 | |
J29003 | ADAPTER - HOIST, AIR DRIVEN PUMP SPL-1802 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J29003-72 | Hoist Adapter -Air Driven Pump (Adp) Removal/ Installation | 5 | |
J29003-85 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION (CE) | 6 | |
J29003-93 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION | 7 | |
J29007-1 | HOIST ADAPTER - ENGINE DRIVEN PUMP LEADING EDGE SLATS | 5 | |
J29007-2 | Hoist adapter-engine driven pump | 3 | |
J29007-3 | Hoist adapter-engine driven pump | 3 | |
J5100 | TORQUE ADAPTER SET, 12 POINT, 3/8" DRIVE | 2 | |
J5853 | DRIVE ADAPTER, SIZE: 3/4'F X 1'M, MAKE: PROTO | 1 | |
J71002-61 | Square Drive Adapter | 1 | |
J71002-81 | SQUARE DRIVE ADAPTER STORAGE BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J71007-75 | Square drive adapter | 1 | |
K.232A | ¾ DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K230B | DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27001 | ADAPTER - LEADING EDGE / TRAILING EDGE PWR DRIVE U | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007 | DRIVE ADAPTER EQUIPMENT - ACTUATOR HORIZONTAL STAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-1 | DRIVE ADAPTER EQUIPMENT - ACTUATOR, HORIZONTAL STABILIZER TRIM | 8 | |
K27007-1-A | Drive adapter-actuator,horizontal stabilizer trim | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-2 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-4 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-5 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-6 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-7 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27012 | DRIVE ADAPTER - TORQ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27012-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27028 | Spline Adapter -Leading Edge/Trailing Edge Power Drive Unit. Manual Drive | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27028-1 | Spline Adapter - LE/TE Power Drive Unit, Manual Dr | 1 | |
K29003-1 | Adapter Assy - Engine Driven Pump Bleed Adapter | 6 | |
K52030 | ADAPTER -0 MANUAL DRIVE, LCD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K52030-1 | Adapter -Manual Drive. Large Cargo Door | 8 | |
K52030-2 | ADAPTER-MANUAL DRIVE,LCD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L135M2905101 | FLEX WITH ADAPTER FOR HYD DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M357-5 | 3/8 Drive Torque Adapter | 1 | |
MA270002-1 | ADAPTER, LE SLAT AND TE FLAP, MANUAL DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ME9026-0300 | ACTUATOR DRIVE SHAFT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
MHC-12 | DRIVE SHAFT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MHCPDN-3 | DRIVE NUT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B04008 | ADAPTER DRIVE FLAP | 8 | |
MIT65B81561 | SPLINE ADAPTER - OUTBOARD FLAP DRIVE | 4 | |
MIT65B81875 | SCREWDRIVER - ADAPTER, RUDDER, ELEVATOR FEEL ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MT357-5 | TORQUE ADAPTER (FRDH101 *; 3/8" SQUARE DRIVE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OAT-2193 | OUTLINE ADAPTER SQUARE DRIVE CLUTCH SET RUN IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PF53175 | WETSPLINE ADAPTER, CONSTANT SPEED DRIVE (CSD) | 3 | |
PWA102093 | ADAPTER - ENGINE TURNING DRIVE | 1 | |
PWA102390 | ADAPTER, DRIVE -ENGINE TURNING, BORESCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA10408 | BORESCOPE ADAPTER FOR STARTER DRIVE | 6 | |
PWA105056 | ADAPTER-DRIVE, BORESCOPE INSPECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA105136 | ADAPTER - TORQUE, RADIAL DRIVE UNIT - PW2000 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA106491 | ADAPTER,DRIVE-BORESCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA107032 | ADAPTER-MAIN GEARBOX VFG DRIVE OIL SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA20333 | ADAPTER-SPLINED HYD. WRENCH TO HEX DRIVE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA20333 REV A | ADAPTER-SPLINED HYD. WRENCH TO HEX DRIVE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA26873 | ADAPTER - FLANGE, LPC DRIVE TURB SHAFT_[PWA26873] | 2 | |
PWA27274 | ADAPTER - WRENCH, FRT COMP DRIVE_[PWA27274] | 2 | |
PWA80158 | ADAPTER FACE SEAL ROTATING RING STARTER DRIVE | 1 | |
PWC37824 | ADAPTER, UPPER ANGLE DRIVE BEARING GAGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC37933 | Adapter, Angle Drive Housing to PowerArm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC51263 | DRIVE ADAPTER | 1 | |
RB T101972 | Holding Plate Set, Adapter, Tail Rotor Drive | 2 | |
RBA9957 | Main Rotor Drive Shaft Torque Adapter (Frdh101) | 1 | |
RBT101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 1 | |
RC2180G01 | ADAPTER, OFFSET, 12", FUTUREDRIVE NG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RC2500G05 | " CFM56-5B/CMANUALDRIVE PADADAPTER 1 " | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RC2500G06 | "CFM56-7B MANUAL DRIVE PAD ADAPTER 1 " | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RC2702G01 | MANUAL DRIVE PAD ADAPTER ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RC2990G01 | ADAPTER, MANUAL DRIVE PAD, GENX-1B & GENX-2B ENGINE, FUTUREDRIVE NG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RCA-PW8D | ENGINE DRIVE ADAPTER | 1 | |
RF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
RRT054898 | DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RRT069161 | DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SDM-11 | ADAPTER FLEXIBLE DRIVE SHAFT | 6 | |
SDM11 | ADAPTER − FLEXIBLE SHAFT DRIVE | 6 | |
SDM11A | ADAPTER - FLEXIBLE SHAFT DRIVE | 1 | |
SPL-3997 | DRIVE ADAPTER EQUIPMENT, HORIZONTAL STABILIZER TRIM ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SRDH341 | ADAPTER, TORQUE, 1/2" DRIVE, 3" LENGTH, 1-1/16" | 1 | |
SRES20 | TORQUE ADAPTER ( ½ DRIVE 5/8) | 2 | |
ST2583-1 | ADAPTER FLAP DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2603-3 | 1/4" DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-7111 | ADAPTER - HEX WRENCH, 0.25-INCH HEX TO 0.375IN SQUARE DRIVE, STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD67669 | Torque Adapter-Main Drive Shaft | 1 | |
STD67685 | Adapter-Drive Pad | 1 | |
T-25817 | ADAPTER, MOTOR DRIVE SHAFT TORQUE | 1 | |
T101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 1 | |
T101972 | HOLDING PLATE SET, ADAPTER, TAIL ROTOR DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T25817 | Adapter, Motor Drive Shaft Torque | 1 | |
TA3 | ADAPTER, 1/4" INTERNAL DRIVE X 3/8" EXTERNAL DRIVE | 6 | |
TAM28348-15 | 3/8” DRIVE 9/16” TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TAM28948-11 | 3/8” DRIVE 3/8” TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TAM28948-13 | 3/8” DRIVE 7/16” TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TAM28948-32 | 3/8” DRIVE 5/16” SLIM TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TS1171 | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 2 | |
TS1171 (SN# L20843, TOOL CODE # D928) | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WT-112471 | DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
f 70333-1 | Adapter Constant Speed Drive | 2 | |
f70333-1 | Adapter Constant Speed Drive | 2 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.