| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWA 25574 | PLATE TOOL | 1 | |
| PWA 26289 | PLATE TOOL | 2 | |
| T103310-103 | PLATE TOOL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 092E (SERIES) | TOOL BASE PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3101-62-101 | TOOL, M/ROTOR GRIP PLATE SEAL INSTAL -109 (2 PZAS) | 1 | |
| 109-3110-07-1 | AGUSTA TOOL - RING, SWASHPLATE DUPLEX BEARING INSTL | 1 | |
| 109-3110-08-1 | AGUSTA TOOL - FIXTURE, SWASHPLATE SUPPORT | 1 | |
| 109-3130-01-121 | AGUSTA T/R - TOOL, TR, STATIC BALANCE - PLATE ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3130-01-147 | TAIL ROTOR STATIC BALANCING TOOLS AND PLATE SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3900-82-121 | TOOL SET SWASH PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109011203103A561C | POSITIONING/ BONDING TOOL, METAL PLATES AND FIBERGLASS SHIMS BONDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1000 | Tool that pushes the bushing out of or into the torque plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1036 | Tool that holds the toque plate when the bushing is removed or installed | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1101 | Holding tool for torque plate bushing removal/installation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1102 | Tool for Installation of Lock Plates on Bolts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1275 | PLATE INBD / OUTBD WHEEL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1560-1 | TOP PLATE - GREASE SEAL INSPECTION TOOL | 2 | |
| 114-1560-2 | BOTTOM PLATE - GREASE SEAL INSPECTION TOOL | 2 | |
| 114-1589-1 | TOP PLATE- TOOL FOR OUTER WHEEL GREASE SEAL INSPECTION | 2 | |
| 114-1589-2 | BOTTOM PLATE- TOOL FOR OUTER WHEEL GREASE SEAL INSPECTION | 2 | |
| 114-1597 | TOOL THAT HOLDS TORQUE PLATES (95A) WHEN BUSHINGS (90A) ARE INSTALLEDREMOVED | 1 | |
| 114-1598 | TOOL THAT PUSHES THE BUSHINGS (90A) OUT OF TORQUE PLATES (95A) | 1 | |
| 114-1610 | TOOL THAT HOLDS THE TORQUE PLATE WHEN THE BUSHING IS INSTALLED OR REMOVED | 1 | |
| 114-1611 | PUSHER TOOL FOR REMOVAL AND INSTALLATION OF THE BUSHING IN THE TORQUE PLATE | 2 | |
| 114-1611-AZL | PUSHER TOOL FOR REMOVAL AND INSTALLATION OF THE BUSHING IN THE TORQUE PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1617 | TOP AND BOTTOM PLATES FOR THE GREASE SEAL INSPECTION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-279 | TOOL TORQUE PLATE DURING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-369 | TOOL THAT PUSHES THE BUSHING IN OR OUT OF THE TORQUE PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-439 | TOOL, CUP INSTALLATION PLATE | 1 | |
| 114-549 | TOOL FOR INSTALLATION OF LOCK PLATES ON BOLTSLOCK | 1 | |
| 114-802 | TOOL: CUP INSTALLATIONPLATE 145NW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11654 | FNZ DRILL PLATE GUIDE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 139W00-542-00 | BENDING TOOL (FOR LOCKING PLATE OF ANTI-RATTLE NUT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 139W00-542-01 | HOLDING PLATE (FOR BENDING TOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18193-10 | TOOL FOR THREADING HOLES NECESSARY FOR INSTALLATION OF HELICOIL INSERTS IN THE TORQUE PLATE | 3 | |
| 2586 | PLATE, SPECIAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1901035 | DISENGAGEMENT PLATES ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1901072 | EMP VALVE PLATE ALIGNMENT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2-86160-807 | EMTEQ TEMPLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2713629004-36 | POSITIONING TOOL, PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 287549-1 | POSITIONNING TOOL BUTTERFLY PLATE | 1 | |
| 2C90004G01 | SPECIAL TOOL - COOLING PLATE PULLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2MIT2A264-0812-1 | ADAPTOR PLATE R&I TOOL, POTABLE WATER TANK | 5 | |
| 2MIT450Z3613 | 787 LOCATING TEMPLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 330A93-2020-01 | TOOL,INSERTING BEARING SWASHPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35-93346-0001 | DRILL HOLES TEMPLATE TOOL | 1 | |
| 350A93-3320-00 | BEARING SEAL/NON-ROTATING SWASHPLATE INSERTIONTOOL | 1 | |
| 350A93-3324-00 | NON-ROTATING SWASHPLATE /ROTATING SWASHPLATEINSERTION TOOL | 1 | |
| 350A93-3325-00 | BEARING SEAL/ NON-ROTATING SWASHPLATE EXTRACTIONTOOL | 1 | |
| 350A93-3710-00 | SWASH PLATE REMOVAL TOOL | 3 | |
| 350A93-3712-00 | SWASH PLATE REMOVAL TOOL | 2 | |
| 350A93-3713-00 | M/R SWASHPLATE BEARING TOOL | 2 | |
| 350A93-3714-00 | SWASH PLATE REMOVAL TOOL | 1 | |
| 350A93332300 | FITTING TOOL STAT./ROTAT PLATE | 1 | |
| 350A93332400 | EXTRACTOR TOOL STAT/ROTATING PLATE | 1 | |
| 350A93332500 | EXTRACTOR TOOL BEAR SEAL/STAT PLATE | 1 | |
| 350A94-2700-00 | FLIGHT CONTROL RIGGING TOOL -INCL. 7 DEGREE PLATE & PIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 350A94-2700-00/05 | Flight Control Rigging Tool-incl. 7 degree plate & pins | 1 | |
| 350A94-3700-00 | SWASHPLATE IMMOBILIZING TOOLS | 1 | |
| 365A93-3111-01 | SWASH PLATE REMOVAL TOOL | 1 | |
| 369029931 | TAIL ROTOR SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369D29931 | TAIL ROTOR SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 392254777528MD | MAIN ROTOR SWASHPLATE REGREASING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3A2983 | FLAPPER PLATE GASKET ASSEMBLY ALIGNMENT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3A2983-8 | ALIGMENT TOOL, FLAPPER PLATE GASKET ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3A2983-9 | ALIGNMENT TOOL FLAPPER PLATE GASKET ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6200G01931 | AW139 SWASHPLATE ASSY TOOL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6200G02031 | SWASH PLATE ASSEMBLING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6205G11231 | SWASH PLATE TOOL KIT, AW139 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6205G13831 | TOOL KIT, SWASHPLATE ASS ASSEMBLY (CASE 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6205G15231 | TOOL KIT SWASHPLATE CASE 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6205G15232 | TOOL KIT, SWASHPLATE ASSY, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G633OA00532A005A | ANTI-TORQUE PLATE TOOL AND BUSHING SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6705G06031 | AW139 SWASHPLATE ASSEMBLY TOOL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 40400TAAI3991320-21 | TEMPLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 416-005 | NAMEPLATE SLEEVE EXPANSION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 424630M0NT1-1 | SUPPORT PLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 429-201-002-10 | SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 429-201-002-101 | SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4920-99-665-7317 | SEAL PLATE REMOVAL/ INSTALLATION TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5163A43 | WRENCH SET:COMBINATIONTYPE:RATCHETING BOX SIZE:3/8 INCH - 3/4 INCH OPEN SIZE:3/8INCH - 3/4INCH STYLE:12- POINT MATL:CHROME PLATED NUMBER OF PIECES:10 PIECES CONT:PLASTIC WRENCH:COMBINATION STANDARD SET IN INCHES TOOLS - HAND / POWER :STANDARD SET IN INCHE | 1 | |
| 535-10 | TOOL FOR INSTALLATION OF HELICOIL INSERTS IN THE TORQUE PLATE | 2 | |
| 535-9 | TOOL FOR INSTALLATION OF HELICAL-COIL INSERTS IN THE TORQUE PLATE | 3 | |
| 558-1-05785 | NAMEPLATE CLAMPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 601R31-020K90 | KIT, DCU DUMMY PLATE TOOL | 1 | |
| 620-880-595-0 | TIGHTENING TOOL FOR IDENTIFICATION PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 650 | TOOL TO REMOVE LOCK PLATES | 5 | |
| 68101L9291110103 | CUTTING TEMPLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6F6230G05231 | TOOL KIT, SWASHPLATE ASSY WINDSHILD LOCKIN PIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8007885100 | TOOL - TEMPLATE, CHECKING ASSEMBLY,BLADE EROSION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 815526-1 | PLATE AFT TOOL | 1 | |
| 82700011-001-138 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 8546645 | IMMOBILIZER/INDEX PLATE, ANTI ROTATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 85517021-001-138 | TOOL-LEFT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| 85517021-002-138 | TOOL-RIGHT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| 856A2413G01 | TOOL,TEMPLATE FAN | 2 | |
| 856A2801 | TOOL: TOOL,BASEPLATE R/I | 5 | |
| 856A2801G03 | TOOL: TOOL,BASEPLATE R/I | 7 | |
| 856A3728G01 | TOOL - ENG SEALING PLATE & LOCK ADAP | 12 | |
| 85740007-S901-138 | TOOL-AILERON TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85740007-S903-138 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85740007-S904-138 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85740009-S903-138 | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85741000-001-138 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85741000-003-138 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85741000-004-138 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 87804014-101-76 | TRIMMING TEMPLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 881-7-083-000 | SEAL PLATE REMOVAL/ INSTALLATION TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 895-3101-19-101 | TOOL/M/R BLADE LAP PLATE BONDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8G6230G01331 | TOOL KIT, SWASHPLATE ASSY ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 906 | Lock Plate Installation Tool | 4 | |
| 92700-10354-041 | MAIN ROTOR SWASHPLATE SUPPORT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9523467 | GRIP DRIVE TOOL AND BASE PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A54403024000 | ADAPTOR PLATE TOOL | 8 | |
| 98D32603000000 | SIMULATOR PLATE TOOL | 25 | |
| 98D52003002000 | TOOL-COVER PLATE PRE-CRUSHING | 14 | |
| 98F32304001000 | SIM. PLATE TOOL | 6 | |
| 98F32304003000 | PLATE - SIMULATION. TOOLING | 15 | |
| 98L57703000000 | TOOL SET BRIDGE PLATE BEARING | 1 | |
| 98S76000006000 | TEMPLATE - HMU ADJUSTING TOOL | 3 | |
| 9R3422G01 | TEMPLATE , FORWARD FAN CASE (AXIAL MARKING TOOL ) OPTIONAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1569-00 | PULL OUT TOOLING PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A24006-1 | B767 BATTERY HOIST PLATE TOOL | 5 | |
| A27117-1 | ANGLE ASSY PLATE / SPLINE DRIVE TOOL | 8 | |
| A300-SCUFF-PLATE | A300 SCUFF PLATE JIG TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A5794213400-ATK | PLATE AASSY SIDE ALIGN. TOOL KIT (8 IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AC21826000-1 | RIVETING TOOL (PRESSURE PLATE) | 5 | |
| AC21866000 | TOOL FOR REMOVAL/INSTALLATION OF TORQUE PLATE BUSHING ASSEMBLY | 3 | |
| AGE-03183-401 | TOOL, PLATE, ASSY | 1 | |
| AGE-03183-403 | TOOL, PLATE, ASSY | 1 | |
| AST4552 | Cam Plate Locking Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT55722 | Orifice nut and plate assembly tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AWM 1 LOCK | METRIC SET( ZINC PLATED) 11 TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B49001-36 | B767 APU CONVERTER PLATES TOOL | 1 | |
| C00814100-LJIG02-0001 | TOOL - TEMPLATE, DOUBLER LOCATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C26942100-219 | TOOLING TOWER LOCATION PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C36008-2 | TOOL - BLANKING PLATES CFM SERIES | 5 | |
| C57007 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 1 | |
| C57007 | Dispatch Tool - Cover Plate. Winglet Lower Blade | 1 | |
| C57007-1 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 2 | |
| C57007-25 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 5 | |
| C57007-36 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 3 | |
| C623G6001101 | FIXING TOOL CYCLIC SWASHPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CABIN_ALT.SW-ADAPTOR | ALT SWITCH & ADAPTOR PLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CDKB737-400 | AET737-11 FLOOR BEAM SUPPORT TOOLING,-12 CARGO DOOR LOWER JAMB TOOLING,-13 CARGO DOOR UPPER JAMB TOOLING, -14 CARGO DOOR LATCH JIG, -51 CDK DRILL TEMPLATE KIT | 1 | |
| CJMDX34-004 | TOOL KIT STATIC PLATE | 1 | |
| CJMDX34-004A | Static plate measurement tool | 4 | |
| CJMDX34-004B | STATIC PLATE GAGE TOOL | 2 | |
| CSTL19725-4 | STATIC PLATE TOOL | 4 | |
| D-700-366HL | RIVETLESS NUTPLATE INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D44-1426-1 | TOOL, ADAPTER PLATE HEIGHT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D44-1426-1 (1400999-121) | 737 2KU Adapter Plate Inst Tool (gogo) (Set of 3) | 1 | |
| D44-1426-5 | ADAPTER PLATE INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D97E00-606 | PLATE LOCKING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAH602622 | DOOR SELECTOR PLATE TOOL | 7 | |
| DT1893AY | TOOL KIT RIVETLESS NUTPLATE INSTALLATION | 1 | |
| F26515000-1 | TOOL USED TO RIVET THE TORQUE BUTTONS AND THE END PLATE TO THE TORQUE PLATE | 3 | |
| F27294000 | STOP PLATE (1-070) INSTALLATION TOOL | 2 | |
| F27492000 | TOOL-PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F47116 | TOOL FOR SECURING THE LOCK PLATES OF THE JET LOCK-NUL | 1 | |
| Figure 512 | Torque Tube Backing Plate Out-Of-Flatness Check Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GALLEYTEMPLATE | GALLEY TEMPLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS20965-1 | TOOL (PROP MOUNT ADAPTER PLATE) | 5 | |
| GSB2712002 | TOOL-AILERON RIGGING DRAWING AND MYLAR TEMPLATE | 1 | |
| GSB2712003 | TOOL-AILERON TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSB2712004 | TOOL-TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2712005 | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSB2712005| | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSB2712006 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSB2712007 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715001 | MYLAR TEMPLATE − LEFT GEAR TAB RIGGING TOOL | 4 | |
| GSB2715001-IAS | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715002 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2715002-IAS | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715003 | TOOL-LEFT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| GSB2715004 | MYLAR TEMPLATE - RIGHT ELEVATOR RIGGING TOOL | 1 | |
| GSB2715005 | MYLAR TEMPLATE, AILERON RIGGING TOOL | 5 | |
| GSB2715005-IAS | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2733003 | AOA VANE TOOL - MYLAR TEMPLATE | 3 | |
| H21942 | REMOVAL TOOL FOR FRONT END PLATE SPSD BY H21984000 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| H21984000 | REMOVAL TOOL FOR FRONT END PLATE | 2 | |
| HA-369-SPRG | Swahsplate Re-grease Tools | 1 | |
| HU45346 | LOCKPLATE INSTALLATION OR REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU87112-1 | FIXTURE # CENTRALISING TOOLT RVT (LOCATOR-CENTRALIZE PLATE PIVOT DOOR) | 8 | |
| JACK-PLATE | JACK PLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LMT−13444−1 | Rework Tools − Nut Plate & Washer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT27473 | TOOL FIXING PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M46196-100 | MOUNTING PLATE TOOL | 8 | |
| M46214-1000 | ADJUSTMENT TOOL WITH THE TEMPLATES (M46214-1, S47789 AND S47790) | 9 | |
| ME5102 | TOOL BASE PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| O104463 | TOOL FOR RIVETING IDENTIFICATION PLATE | 1 | |
| PC26942100-219 | TOOLING TOWER LOCATING PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PER27452 | TOOL FOR COUNTERBORING SQUARE BRACKETS AND PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 26120 | PLATESTG 2HPT TOOL | 2 | |
| PWA 35925 | TOOL PLATE | 1 | |
| PWA8642 | TOOL, ADAPTER PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC38268 | TEMPLATE VEDI TOOL P/N 98S76000004000 | 10 | |
| PWC66926 | TOOL PLATE COVER | 4 | |
| R721-4-60 | RIVETLESS NUT PLATE REMOVAL TOOL | 1 | |
| RB 92700-10354-041 | MAIN ROTOR SWASHPLATE SUPPORT TOOL | 1 | |
| RB T101291-103 | Swashplate Rigging Tool | 1 | |
| RB T103262-101 | RIGGING TOOL SWASHPLATE | 1 | |
| RB T103288-101 | Swashplate Rig Tool | 1 | |
| RB T103314-101 | PLATE LIFT TOOL | 1 | |
| RB T103344-101 | Plate Set Tool | 1 | |
| RB92700-10354-041 | MAIN ROTOR SWASHPLATE SUPPORT TOOL | 1 | |
| RBD25148-80901 | Output Shaft Bearing Removal Tool (Plate Only) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBE350A93-3710-00 | Main Rotor Swashplate Bearing Tool | 1 | |
| RBE350A93-3712-00 | Main Rotor Swashplate Bearing Tool | 1 | |
| RBE350A94-3700- | SWASHPLATE IMMOBILIZING TOOLS ADJUSTMENT BRACE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBE350A94-3700-00 | Swashplate Immobilizing Tools | 1 | |
| RBE350A94-3700-A | Swashplate Immobilizing Tools Long Brace & Parts | 1 | |
| RBE350A94-3700-B | Swashplate Immobilizing Tool, Short Brace Assembly | 1 | |
| RBE350A94-3700-C | Swashplate Immobilizing Tools Adjustable Brace | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBIR7028 | SWASHPLATE BEARING INSTALL AND REMOVAL TOOL | 1 | |
| RBT 18013 | SWASHPLATE SUPPORT TOOL | 1 | |
| RBT103310-105 | TOOL PLATE | 1 | |
| RBT18600 | Main Rotor Swashplate ReGreasing Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBT18601 | Main Rotor Swashplate ReGreasing Tool | 2 | |
| RBT18604 | TAIL ROTOR SWASHPLATE BEARING REGREASE TOOL | 2 | |
| RBT400227 | Swashplate Rigging Tool (407-201-300-101) | 1 | |
| RBT400354 | ALIGNMENT TOOLS SWASHPLATE | 2 | |
| RBW109-3110-10-101 | Swashplate Positioning Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBW6205G11231-3G | AW139 Swashplate Assembly Tool Kit | 1 | |
| RBW6205G11331-3G | Tool Swashplate Friction Checking | 1 | |
| RBW6205G13831-3G | TOOL KIT, SWASHPLATE | 1 | |
| RBW6205G15231-3G | TOOL KIT, SWASHPLATE ASSY | 1 | |
| RBW6205G15231-3G-3G | TOOL KIT, SWASHPLATE ASSY ASSEMBLY | 1 | |
| RRT051205 | LOADING TOOL - RETAIN RIM COVERPLATE LOCKING RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RRT051208 | LIFT TOOL- LIFT SEALPLATE TO HP TURBINE DISC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RRT063161 | CUTTING TOOL - LOCK PLATES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-PLATE | SURFACE PLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SK34477-101 | TOOL NET POCKET FRAME HOLE TEMPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SK34477-103 | TOOL NET POCKET FRAME HOLE TEMPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SLS-200-013-001 | SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SURFACE-TABLE | SURFACE PLATE TOOL | 1 | |
| T-4148-2 | PLATES FOR TOOL GS25565-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-TANK-ADAPTOR-PLATE | TOILET TANK ADAPTOR PLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101291-102 | SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101291-103 | SWASH PLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103262-101 | RIGGING TOOL SWASHPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103288-101 | SWASHPLATE RIG TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103314-101 | PLATE LIFT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103344-101 | PLATE SET TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TOILETTANK | TOILET TANK CLEANING PLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| USAG29 | NUT PLATE RIVET TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| V2 | PH TOOL V2 (A4) CALIBRATION BLOCK, 12.5MM, 1018 STEEL, NICKEL PLATED | 2 | |
| WASTE-PLATE | A320/1 WASTE PLATE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Z0104464 | Tool for riveting the bonding plate | 1 | |
| page 530 | Torque Tube Backing Plate Out-Of-Flatnessn check tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
