Partial Match
Tool #
Description
In Stock
Our Sources
For Aircraft*
Photos
Add to Request
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 2
For Aircraft*: N/A
Photos:
Description: LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 2
For Aircraft*: N/A
Photos:
Description: CALIBRATION STANDARD FIGURE 15 FASTENER (HL40-6-5 + HL70-6, NAS6208-11 + KFN5428), 7075-T6 ALUMINUM
In stock: 0
Sources: 2
For Aircraft*: N/A
Photos:
Description: CALIBRATION STANDARD FIGURE 15 FASTENER (HL40-6-5 + HL70-6, NAS6208-11 + KFN5428), 7075-T6 ALUMINUM
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 2
For Aircraft*: N/A
Photos:
Description: CALIBRATING STANDARDS, BOLT HOLE, ALUMINUM 7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: TRANSDUCER GUIDE MATERIAL 7075-T6 ALUMINUM
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Main Rotor Puller (2 Jaw) "C" Model, 7075 Al
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Countersink Standard, 14 Holes, 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Hole Standard, .875"Ø x .020" Thru notch, 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Hole Standard, 1.0"Ø x .020" Thru notch, 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Hole Standard, 1.125"Ø x .020" Thru notch, 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 1 hole standard .700" diameter hole, 2" x 2" x .5" thick 7075-T6, .020 deep x .060 long midwall notch
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch, 7075-T76 Aluminum
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 thru notch, 7075T6 Aluminum
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 Hole Reference Standard, 1/8" to 3/4", with .030" corner notch & .020" corner notch, 7075-T6 Aluminum
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notches,.020" Midwall notches, 7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notch, .020"thru notch, 7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 15 Hole Standard, 1/8" to 1.0" x 1/16" w/ .040" thru notch and .030 corner notch, 7075-T6 Alum, w/ certs
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 20 Hole Calibration Standard, Thru Notches 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 5 Hole Standard, .930, 1.00, 1.250, 1.500, 2.375, .030 Corner and .020 x .030 Midwall, 7075T6 Aluminum
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, .020 midwall notch, 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 8 hole calibration standard, .625" thru 1.5", increments of .125", .030" corner notches, 7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 8 Hole Standard, .098", .128", .161", .193", .228",250", 312", 375" .020 thru notch, 7075T6 aluminum
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 8 hole calibration standard, .030 midwall notch, 7075T6, 4.8mm, 6.35mm, 7.9mm, 9.5mm, 11.1mm, 12.7mm, 13.5mm, 14.29mm
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 8 hole calibration standard, .030 midwall notch, 7075T6, 5mm, 6mm, 7mm, 8.15mm, 9.42mm, 11mm, 12.6mm, 14mm
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 8 hole calibration standard, .030 corner notch, .020 thru notch, 7075T6, Hole Sizes; .312 - .750, 1/16" increments
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 hole calibration standard, 3/16" to 3/4" holes, .020" corner, 008", .020", .040" surface notches 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 hole calibration standard, 3/16" to 3/4" holes, .020" Thru, 008", .020", .040" surface notches 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 hole calibration standard, 1/8" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notch, .020"thru notch, 008", .020", .040", 7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 12 hole calibration standard, .030" corner notches, 1/8" to 13/16", 008", .020", .040" surface notches, 7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: REFERENCE STANDARD ALUMINIUM 7075 T6-CONF ASTM E164
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Surface Standard with .2, .5, 1mm Notches, 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Surface Standard, .008"-.020"-.040" deep notches, 7075-T6, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Surface Standard,7075-T6 Aluminum, .010, .020, .030 deep notches 4"x1"x.375" thick, .060" long, .006" max wide notch
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Navy Reference Standard, 7075T6 Aluminum
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: STEP WEDGE 10 0.030, 0.040, 0.050, 0.060, 0.070, 0.080, 0.090, 0.100, 0.110, 0.120 7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 10 STEP WEDGE, .080" TO .300", 7075-T6,
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 10 Step Wedge, .030 .040 .050 .060 .070 .080 .090 .100 .110 .120, .5" x .5" pads, 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 3 Step Wedge 7075 T6 1" x 4" .10 .20 .30
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 4 Step Wedge, .5, 1.0, 1.5, 2.0mm 4"x1" 7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 4 Step Wedge, .500, 1", 1.5", 2" 7075-T6 Alum
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 5 STEP .025,-040,.050,.080,.100 7075T6 5"X1"
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 5 Step Wedge 20x20MM step sizes, starting with 2.5MM to 12.5MM in 2.5MM increments,7075-T6 Al
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 5 Step Wedge 15x15mm step sizes, 1, 3, 5, 7, 9mm +/- .02mm, 7075-T6 Al, Width and Length of +/- .5mm
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 6 Step Wedge, .50mm, 1.00mm, 1.50mm, 2.00mm, 2.50mm, 3.00mm, 20mm x 20mm, 7075-T6 Aluminum
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 6 Step Wedge 7075T6 .015 .020 .025 .030 .035 .040
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 6 Step Wedge, .050", .060", .070", .090", .100", .125" Thicknesses, 6" x 1" overall size, 7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 8 Step Wedge 7075T6 0.015,- 0.025,-0.040,-0.060,-0.080,-0.100,-0.150,-0.200 1"x1" pads, step tolerance of .001"
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 8 Step Wedge 7075T6 0.020,- 0.025,-0.030,-0.036,-0.040,-0.045,-0.050,-0.056 1"x1" pads, step tolerance of .0004"
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: 8 Step Wedge 7075T6 0.063,- 0.071,-0.080,-0.090,-0.100,-0.118,-0.125,-0.140 1"x1" pads, step tolerance of .0004"
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 1, MATERIAL 2024-T3, STRINGER=7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 2, MATERIAL 2024-T3, STRINGER=7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 3, MATERIAL 2024-T3, STRINGER=7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 4, MATERIAL 2024-T3, STRINGER=7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 5, MATERIAL 2024-T3, STRINGER=7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 6, MATERIAL 2024-T3, STRINGER=7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 7, MATERIAL 2024-T3, STRINGER=7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 8, MATERIAL 2024-T3, STRINGER=7075-T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Douglas Standard, SB 53-253, A27-320 - SAME AS DAC GSET AL.01 but 7075-T651, Mark with SB53-253, A27-320
In stock: 0
Sources: 2
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: DOUGLAS REFERENCE STANDARD 53-253, 7075-t651
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Douglas Standard, 1 notch block, 7075-T651
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: DOUGLAS MD-11 REFERENCE STANDARD. MD11-53-001 FIGURE 1 SHEET 1. MATERIAL: 7075-T6 ALUMINUM
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: AIRCRAFT MAINTENANCE FIXTURE FOR THE KC-135 AIRCRAFT DUAL PRESSURE CONTROL VALVE 39-075 & SERVO VALVE 37-001
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: IIW-2 CALIBRATION BLOCK 7075 ALUMINUM
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Hole Standard, 6 holes from .187 to .500, Based on NDT1016 thru NDT1021 series std, 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: Hole Standard, 17 holes from .156 to 1.00 x .062 Inc., Based on 1016 series std, 7075T6
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
Description: PLAIN WEAVE 60 MESH WIRE DIAMETER 0.0075 INCH 220 MICRON NOMIAL RATING CORROSION RESISTANT STEEL
In stock: 0
Sources: 1
For Aircraft*: N/A
Photos:
In stock: 0
Sources: 2
For Aircraft*: N/A
Photos:
*For Aircraft - This is not an exhaustive list. Many items in our system can be used on multiple aircraft.