Tool Description: 437

Partial Match

Tool #

Description

In Stock

Our Sources

For Aircraft*

Photos

Add to Request

(CALIB) 201137-CA

Description: LIFTER PROPELLER Same as P/N GS23437-1

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

0.4375-20

Description: 0.4375-20 WIRE THREAD TOOL KIT（7/16）

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

08162007

Description: 1437.TPLUS.7-TORX PLUS SCREWDRIVER BIT IP7

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

10600-910A

Description: Spin Rig Adaptation & Tooling for 1701422 and 769437 Series Rotors

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

10R9000-03

Description: Dotco® Precision Turbine Grinders (Capacity: 3/16" Carb Burr,3/16" Diamond) (Rpm: 100,000) (Collet: 3 mm) (Overall length: 5.4" (1437 mm)) (Add to cart: Add To Cart)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

10R9000-08

Description: Dotco® Precision Turbine Grinders (Capacity: 3/16" Carb Burr,3/16" Diamond) (Rpm: 100,000) (Collet: 3 mm) (Overall length: 5.4" (1437 mm)) (Add to cart: Add To Cart) (Capacity: 3/16" Carb Burr,3/16" Diamond) (Rpm: 100,000) (Collet: 1/8") (Overall length:

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

11C4693G01

Description: SPL-16437 - INSTALL/REMOVE FIXTURE - MAIN FUEL OIL HEAT EXCHANGER

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

125

Description: BOEING REFERENCE STANDARD 767 PT 6 -51-00-05 FIG 2 PAGE 6 & 737 pART 6 51-00-00 FIGURE 2 PAGE 6 DETAIL II. HOLE SIZES: 0.1875, 0.250, 0.3125, 0.375, 0.4375, 0.500. Material: 4130 or 4340 Cres Steel. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

141437

Description: 141437;390XOPT641 Kenwood Viking 5000/6000 Ser AutoTest and Align;Req Opt218;061

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

15072

Description: PILOTED CHUCK REAMER 0.4375/0.4531"

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

186ABCDEF

Description: BOEING CUSTOM COMBINATION REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.1875", .2500", .3125", .3750", .4375", .500. Each hole size marked with the corresponding Boeing Part number 186A-186F Includes Test Report and Certific...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

186E

Description: BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.4375. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 4

For Aircraft*: N/A

Photos:

218315

Description: Henkel 983437 LOCTITE 11 & 21 200 mL Dual Cartridge Pneumatic Applicator

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

Description: Tesa 00530437 TWIN-CAL IP67 Ã¢â‚¬â€œ Models with rounded measuring faces for internal dimensions and knife-edge jaws for external dimensions Digital Calipers 0-1000mm / 0-39"

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

3211A0000-01

Description: ASSEMBLY FIXTIRE N/P 3211A0000-01 S/N 8003343748

In stock: 0

Sources: 3

For Aircraft*: EMB 170
EMB 175
EMB 190
EMB 195
EMB 170 / EMB 190

Photos:

332A91-0017-20

Description: SHEAR PIN (NSN1730-14-437-4549)

In stock: 0

Sources: 2

For Aircraft*: N/A

Photos:

460006437

Description: 460006437 HOLDING TOOL

In stock: 0

Sources: 15

For Aircraft*: A319
A318
A319 (Sharklets)
A320-100/200
A321-100/200
A320-200 (Sharklets)
A321-200 (Sharklets)

Photos:

50164

Description: 1 DRAWER WALL RACK FOR POWERTOOLS 580 X 280 X 437 MM

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

531001

Description: NUT-.4375-20UNF>> 652422

In stock: 0

Sources: 2

For Aircraft*: N/A

Photos:

543793B10

Description: MITUTOYO 543793B10 DIGIMATIC INDICATOR BATTERY

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

615P032F035

Description: ROTATING PROBE HOCKING SIZE 0.499INCHES&0.437 INC

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

705C-7/16

Description: 7/16" Cobalt Jobber Length Drill Bit (.4375)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

705SP-7/16

Description: 7/16" High Speed Steel Jobber Length Drill Bit (.4375)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

87437131

Description: Replacem. cutting head w. screws 437002

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

87437133

Description: Replacem. cutting head w. screws 437005

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

90-T437C

Description: Bowers Contact Point, .4375" Dia., Threaded #4-48

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

91H352-05

Description: NSN 145963437

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9216656

Description: RECHII KIT 8 SS PROBES RR.187SS/1.1WL, .218SS/1.1WL, .250SS/1.1WL, .312SS/1.5WL, .375SS/1.5WL, .437S

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9217158

Description: BHEC PROBE (.375-.437 1.5 W/L)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9217159

Description: BHEC PROBE (.437-.500 1.5 W/L)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9219978

Description: PROBE 3/8 INCH (0.312”- 0.437”)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9219984

Description: BOLT HOLE PROBES 7/16 INCH (0.437”- 0.500”)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9231049

Description: 437 SCANNER PROBE

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

98A29001001000

Description: UNIT FILLING ALTERNATE BRAKE SYS B/N 533243773

In stock: 0

Sources: 12

For Aircraft*: A319
A310
A310-200
A310-300
A318
A310F
A319 (Sharklets)
A310-200F
A310-300F
A320-100/200
A321-100/200
A320-200 (Sharklets)
A321-200 (Sharklets)
A330
A330-200
A330-300
A330 Freighter
A330-200 Freighter
A340
A340-200
A340-300
A340-500
A340-600
A300B2
A300
A300B4/C4
A300-600/600C/601
A300-600ST Beluga
A300F
A300-600 Combi
A300C4/F4 Freighter
A300-600F Freighter

Photos:

98D27403500000

Description: PITCH TRIM LOCK532743710

In stock: 0

Sources: 37

For Aircraft*: A319
A318
A319 (Sharklets)
A320-100/200
A321-100/200
A320-200 (Sharklets)
A321-200 (Sharklets)

Photos:

99-719

Description: HSS PILOTED CHUCKING REAMERS - STRAIGHT SHANK, STRAIGHT FLUTE DIA. 0.4375

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

99-720

Description: REAMER DIA. 0.4531" X 0.4375"

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

99F53303035000

Description: Airbus Standard, A340-500/600, 53-38-24, PART4: PG437/438 FIG408

In stock: 0

Sources: 1

For Aircraft*: A330
A330-200
A330-300
A330 Freighter
A330-200 Freighter
A340
A340-200
A340-300
A340-500
A340-600

Photos:

9C1088

Description: SCREW, CAP, SOCKET HD-STL .4375-14 UNC-2A X 1.25 LG

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9C4756

Description: PILOTED REAMER .414/.4370

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9C4778

Description: PILOTED REAMER .432/.4375

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

A-5004-0437

Description: Renishaw A-5004-0437 M2 STY D3Z L22 EWL22 d1.5TC

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AEX 437

Description: VALVE SEAT GRINDER PILOT 0.437 DIAMETER

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5007/.437SS-30

Description: HIGH FREQUENCY FLEXIBLE 30° FLAT BOTTOM ROTARY PROBE, 100KHz-2MHz , .4375"Ø STAINLESS STEEL TIP WITH A 3.54"(90mm) WORKING LENGTH SUPPLIED WITH A 4 PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5084

Description: HIGH FREQUENCY ROTARY PROBE, .437ID 25-500KHZ WITH GUIDE 1.375 OD. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5295/.437

Description: RECHII SCANNER PROBE 200KHz-500KHz SPLIT END,.437"-.500", SUPPLIED WITH A 4 PIN STEP LEMO USED WITH RA SCANNER, 2.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5300-.375SE/1T-6L

Description: FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .375"Ø-.437"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5300-.437SE/1T-6L

Description: FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .437"Ø-.500"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-0600G

Description: 5MHz .25" dia PZ37 element medium damped. Case size (.437" X .630" knurled)..Gamma Series

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-1017

Description: Custom Eddy Current Inspection Kit. Includes the following probes, Reference Standard and cables.AUR-.125SE/1.75WL-LF, AUR-.156SE/1.75WL-LF, AUR-.187SE/1.75WL-LF, AUR-.250SE/2.0WL-LF, AUR-.312SE/2.0WL-LF, AUR-.375SE/2.0WL-LF, AUR-.437SE/2.0WL-LF, AUR-...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-ARRY11

Description: Custom Rotary “Y” Probe for RA Scanner. Kit includes 11 probes in a waterproof storage case. One each of the following items: (ARRY-.156-.187), (ARRY-.187-.218), (ARRY-.218-.250), (ARRY-.250-.312), (ARRY-.312-.375), (ARRY-.375-.437), (ARRY-.437-.500), (AR

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-ARRY13

Description: Custom Rotary “Y” Probe for RA Scanner. Kit includes 13 probes. One each of the following items: (ARRY-.125-.156), (ARRY-.156-.187), (ARRY-.187-.218), (ARRY-.218-.250), (ARRY-.250-.281), (ARRY-.281-.312), (ARRY-.312-.375), (ARRY-.375-.437), (ARRY-.437-.50

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1002-1

Description: CUSTOM 3 HOLE STANDARD, MATERIAL: 7075-T6 ALUMINUM, .030x.030" CORNER EDM NOTCH IN EACH HOLE. HOLE SIZES 7/16"(.437"), .1/2"(.500"), 11/16"( .687") DIAMETERS. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1098AL

Description: 12 HOLE REFERENCE STANDARD 2024-T3 .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH ( 24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1098St

Description: 12 HOLE REFERENCE STANDARD 4340 STEEL. HOLE SIZES: .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH (24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1098TI

Description: 12 HOLE REFERENCE STANDARD 6AL4V .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH (24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2003-2S

Description: 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: .187", .250" ,.312", .375", .437", .500", .562", .625", .687", .750", AND 1.0" ( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 304 STAINLESS STEEL. Includes Test Repo

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2054CS-1

Description: CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .156",.250",.312",.375",.437",.500". CORN...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2073AL

Description: 12 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: 25/64(.390), 13/32(.406), 27/64(.421),7/16(.437), 29/64(..453), 15/32(..468), 31/64(.484),1/2(.500), 33/64(.515),17/32(.531), 35/64(.546), 9/16(.562). EDM NOTCH: .030" X. 030" x.005" ±.001" WIDE...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2073TI

Description: 12 HOLE REFERENCE STANDARD 6AL-4V Titanium. Hole Sizes: 25/64(.390), 13/32(.406), 27/64(.421),7/16(.437), 29/64(..453), 15/32(..468), 31/64(.484),1/2(.500), 33/64(.515),17/32(.531), 35/64(.546), 9/16(.562). EDM NOTCH: .030" X. 030" x.005" ±.001" WIDE ...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3019S

Description: CUSTOM AIR FORCE EDDY CURRENT BOLT HOLE STANDARD PER CUSTOMER SUPPLIED DRAWING, 1/4" 8630 STEEL PLATE (4130 EQUIVALENT ALTERNATIVE). EDM: 0.030 x 0.030 CORNER NOTCH. HOLE DIAMETER= 0.437Ø. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3329AL

Description: 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(.313), 11/32”(.343), 3/8”(.375), 7/16”(.437), 1/2”(.500), 9/16”(.562), 5/8”(.625), 3/4”(.750 Ø, 3 S

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3390AL

Description: CUSTOM 10 HOLE FLAT BOTTOM REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188", .218", .250", 312", .375" .437" .500",.562", .625",

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3407AL

Description: Aluminum Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3407SS

Description: 17-4PH Stainless Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125),

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3407ST

Description: 4340 Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7),

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3407TI

Description: Titanium Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3503AL

Description: Aluminum Multi-hole reference standard. Material: 7075-T6 Aluminum. Contains 12 hole sizes; .154" (3.9mm), .189" (4.8mm) .217"(5.50mm), .248"(6.3mm), .281"(7.13mm), .312"(7.92mm), .344" (8.71mm), .375"(9.52mm), .437" (11.09mm), .500"(12.7mm), .562" (...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3520MAG

Description: 16 STEP WEDGE. STEP THICKNESS OF , .0625", .125", .187", .250", .312", .375", .437", .500", .562" .625", 687", .750", .812", .875", .937", 1.00" +/-.002". Pad Size: .620" x 1.5" . 9.20" Long x 1.5" Wide Finished Size. Material: AZ91E Magnesium. Includes

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AGE 13622

Description: LUBRICATING TOOL-FLAP ACTUATOR SERIES 734374

In stock: 0

Sources: 5

For Aircraft*: DHC-8-100 Dash 8 / 8Q
DHC-8-200 Dash 8 / 8Q
DHC-8-300 Dash 8 / 8Q

Photos:

AGE-03248-401

Description: SET - ADAPTERS, RIGGING FLAP-GSE 437

In stock: 1

Sources: 4

For Aircraft*: EMB 170
EMB 175
EMB 190
EMB 195
EMB 170 / EMB 190

Photos:

AGE13622

Description: LUBRICATING TOOL - FLAP ACTUATOR SERIES 734374

In stock: 0

Sources: 5

For Aircraft*: DHC-8-100 Dash 8 / 8Q
DHC-8-200 Dash 8 / 8Q
DHC-8-300 Dash 8 / 8Q

Photos:

AMH-11.10M

Description: MANUAL BOLT HOLE PROBE WITH COLLAR, 50-500KHz, .437"(11.1mm)OD, 2.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AMH.437

Description: MANUAL BOLT HOLE PROBE WITH COLLAR, 50-500KHz, .437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AMH.437/4WL

Description: MANUAL BOLT HOLE PROBE WITH COLLAR, 50-500KHz, .437"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AMHF-.437

Description: MANUAL BOLT HOLE PROBE FERRITE SHIELDED 50-500KHZ MICRODOT CONNECTOR .437" x 3.0" OVERALL LENGTH WITH COLLAR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AMHX-.437-.500

Description: ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR .437".500". 3.0" OVERALL LENGTH, ,MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AMHY-.375-.437

Description: ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 50-500KHz, .375"-.437"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AMHY-.375-.437/500K

Description: ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .375"-.437"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AMHY-.406-.437/3WL

Description: ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .406"-.437"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AMHY-.437-.468/3WL

Description: ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .437"-.468"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AMHY-.437-.500/500K

Description: ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .437"-.500"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AMHY.375-.437/2MHZ

Description: ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 1-3MHz, .375"-.437"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AN929-4J

Description: Cap assembly, pressure seal, 0.4375−20UNJF−3B

In stock: 0

Sources: 23

For Aircraft*: ATR 42-300 / 320
ATR 42-500
ATR 72
ATR 42-400
ATR 42 / ATR 72

Photos:

ARD-1025

Description: FINGER TIP SINGLE ELEMENT DFR STYLE REPLACEABLE DELAY TRANSDUCER, 10MHz .250"Ø(6.35mm), WITH SIDE MOUNT MICRODOT CONNECTOR. Delay Tip length = .437". Other lengths available upon request. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARD-1025T

Description: FINGER TIP SINGLE ELEMENT DFR STYLE REPLACEABLE DELAY TRANSDUCER, 10MHz .250"Ø(6.35mm), WITH TOP MOUNT MICRODOT CONNECTOR. Delay Tip length = .437". Other lengths available upon request. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARD-1050

Description: 10MHZ, .500"Ø(12.7mm) ACTIVE ELEMENT (HIGH DAMPED), REPLACEABLE DELAY TRANSDUCER SIDE MOUNT MICRODOT CONNECTOR. Delay Tip length = .437". Other lengths available upon request.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARD-225

Description: 2.25MHz, .250"Ø(6.35mm) ACTIVE ELEMENT (HIGH DAMPED), REPLACEABLE DELAY TRANSDUCER SIDE MOUNT MICRODOT CONNECTOR. Delay Tip length = .437". Other lengths available upon request.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARD-250

Description: 2.25MHZ .500"Ø REPLACEABLE DELAY TRANSDUCER. SIDE MICRODOT CONNECTOR. Delay Tip length = .437". Other lengths available upon request. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARD-350

Description: 3.50MHZ .500"Ø REPLACEABLE DELAY TRANSDUCER WITH Delay Tip length = .437". Other lengths available upon request. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARD-350S

Description: 3.50MHz .500"Ø REPLACEABLE DELAY TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR. Delay Tip length = .437". Other lengths available upon request. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARD-525

Description: FINGER TIP SINGLE ELEMENT DFR STYLE REPLACEABLE DELAY TRANSDUCER, 5MHZ .250"Ø(6.35mm), WITH SIDE MOUNT MICRODOT CONNECTOR. Delay Tip length = .437". Other lengths available upon request. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARD-550

Description: 5MHZ, .500"Ø(12.7mm) ACTIVE ELEMENT (HIGH DAMPED), REPLACEABLE DELAY TRANSDUCER SIDE MOUNT MICRODOT CONNECTOR. Delay Tip length = .437". Other lengths available upon request. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.375-.437/2WL

Description: RECHII ROTARY PROBE, 100KHz-2MHz, 0.375"-0.437"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.375SE/1.5WL

Description: RECHII BOLT HOLE PROBE 500KHz-3MHz,. SPLIT END .375"-.437"Ø, 1.5"WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER. Includes Test Report and Certificate of Confromance.. SPO-3564

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.375SE/1.5WL-N

Description: NYLON RECHII BOLT HOLE PROBE 100KHz-3MHz, SPLIT END FOR RA SCANNER, 1.5" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR 375"-.437". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.375SE/2.0WL

Description: RECHII SCANNER PROBE 100KHz-2MHz 4 PIN STEP LEMO USED WITH RA SCANNER 3.0" OVERALL LENGTH SPLIT END .375"-.437", 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.375SE/2WL

Description: RECHII BOLT HOLE PROBE 200KHz-3MHz, SPLIT END .375"-.437"Ø , 2.0" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER.Includes Test Report and Certificate of Conformance. SPO-3564

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.437/8L

Description: RECHII BOLT HOLE PROBE, 100KHz-2MHz., EXPANDABLE FROM .437"-.500", SPLIT END USED WITH RA SCANNER, 8.0" OVERALL LENGTH WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.437SE/1.1WL

Description: RECHII ROTARY PROBE, 100KHz-2MHz, SPLIT END 0.437"-0.500"OD, 1.1" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.437SE/1.5WL

Description: RECHII BOLT HOLE PROBE 500KHZ-3MHZ, SPLIT END 437-.500", 1.5"WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER. Includes Test Report and Certificate of Conformance. SPO-3564

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.437SE/1.5WL-N

Description: NYLON RECHII BOLT HOLE PROBE 100KHz-3MHz, SPLIT END FOR RA SCANNER, 1.5" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR 437"-.500". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.437SE/2.0WL

Description: RECHII ROTARY PROBE, 100KHz-2MHz, SPLIT END 0.437"-0.500"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.437SE/2WL

Description: RECHII SCANNER PROBE 200KHz-3MHz 4 PIN STEP LEMO USED WITH RA SCANNER 3.0" OVERALL LENGTH SPLIT END .437"-.500", 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.437SS/1.5WL

Description: STAINLESS STEEL ROTARY PROBE FOR RA2000 SCANNER 100KHz-2MHz 4 PIN STEP LEMO, .437"Ø OD, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-.437SS/2.0WL

Description: STAINLESS STEEL ROTARY PROBE FOR RA2000 SCANNER 100KHz-2MHz 4 PIN STEP LEMO, .437"Ø OD, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-1.375SE/2WL

Description: Universal Rotary Hole Probe 1.375 inch to 1.4375 inch diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 2MHz, supplied with a 4 pin step lemo connector. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-1.437

Description: RECHII ROTARY PROBE, 100KHz-2MHz, 1.437"OD, 1.1" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR-1.4375SE/2WL

Description: Universal Rotary Hole Probe 1.4375 inch to 1.50 inch diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 2MHz, supplied with a 4 pin step lemo connector. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR.375B/SE

Description: RECHII ROTARY PROBE, 100KHz-2MHz, 0.375"-0.437"OD (Ball Head), 1.1" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR.375SE

Description: RECHII ROTARY PROBE, 100KHz-2MHz, 0.375"-0.437"OD, 1.1" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR.375SE/FB

Description: RECHII ROTARY PROBE, 100KHz-2MHz, 0.375"-0.437"OD (Flat Bottom Head), 1.1" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR.406SE

Description: RECHII ROTARY PROBE, 100KHz-2MHz, SPLIT END 0.406"-0.437"OD, 1.1" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR.437

Description: RECHII ROTARY PROBE, 100KHz-2MHz, 0.437"OD, 1.1" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR.437SE

Description: RECHII ROTARY PROBE, 100KHz-2MHz, SPLIT END 0.437"-0.500"OD, 1.1" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR.437SE/FB

Description: RECHII ROTARY PROBE, 100KHz-2MHz, SPLIT END 0.437"-0.500"OD (Flat Bottom Head), 1.1" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR.437SS

Description: ROTATING SCANNER STAINLESS STEEL PROBE 0.437 IN

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARR.437SS/3WL

Description: RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .437"Ø USED WITH RA 2000 SCANNER. 3.0" OVERALL LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARRCS100-.437

Description: RECHII 100° COUNTERSINK ROTARY PROBE 100KHz-2MHz, 0.437" OD, 3.0" OVERALL LENGTH, 4 PIN STEP LEMO. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARRFB30-.437SS/1.5WL

Description: FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE, .437"Ø USED WITH RA 2000 SCANNER. 1.5" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARRFB30-11.1MSS/50MWL

Description: STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 11.1mmØ(0..437"),1.97"(50.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARRY-.375-.437

Description: RECHII ROTARY Y-PROBE 100KHz-2MHz, 0.375"-0.437"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARRY-.375-.437/3WL

Description: RECHII ROTARY Y-PROBE 100KHz-2MHz, 0.375"-0.437"OD, 3.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARRY-.437-.500

Description: RECHII ROTARY Y-PROBE 100KHz-2MHz, 0.437"-0.500"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARRY-.437-.500/3WL

Description: RECHII ROTARY Y-PROBE 100KHz-2MHz, 0.437"-0.500"OD, 3.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARRYFBU-.375-.437

Description: RECHII "Y" FLAT BOTTOM ROTARY PROBE, UNSHIELDED, SUPPLIED WITH 4 PIN STEP LEMO CONNECTOR, 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM .375"-.437"Ø Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARRYFBU-.437-.500

Description: RECHII "Y" FLAT BOTTOM ROTARY PROBE, UNSHIELDED, SUPPLIED WITH 4 PIN STEP LEMO CONNECTOR, 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM .437"-.500"Ø Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARTPX-008

Description: Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.375in (10mm); Tube ID: 0.375-0.437in (9.53-11.1mm); Coil: 1000= 100-2000 kHz; Poly ...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ATC-601

Description: 437_ATC601 (TEST EQUIPMENT)

In stock: 0

Sources: 7

For Aircraft*: CRJ 200
CRJ 700
CRJ 900
CRJ 1000
ATR 42-300 / 320
ATR 42-500
ATR 72
ATR 42-400
ATR 42 / ATR 72

Photos:

ATCSM100-.437

Description: MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .437"Ø DIAMETER. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ATI518SP1092

Description: AT518DWS-.2185-.437-.125-#40

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ATI518SP1125

Description: AT518DWM-.2185-.437-.139 #40

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ATI518SP1201

Description: AT518DWM-.2185-.437-.146 #40

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ATI518SP1207

Description: AT518DWM-.218-.437-.250 #40

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ATMH-.375-.437/SE

Description: MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .375"-.437" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ATMH.375-.437/2WL

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ATMH.437

Description: MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .437" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ATMH.437-.500/2WL

Description: MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .437"-.500" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ATMHF.437/500K

Description: MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .437" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.3437SS/1.5WL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .3437"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.3437SS/2.0WL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .3437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.375

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.375-.437SE/2.0WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.375SE/1.4WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .375"-.437"OD, 1.4" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.375SE/2.0WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.375SE/2.0WL-LF

Description: Universal Rotary Hole Probe Self Expanding from 0.375 inch (9.5mm) to 0.437 inch (11.0mm) diameter, 2 inch (50 mm) working length. Operating frequency 100 KHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration....

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.375SE/3.0WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .375"-.437"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.375SE/4.0WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .375"-.437"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.375SE/5OAL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .375"-.437"OD, 4.0" WORKING LENGTH, 5.0 OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.390SE/2.0WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .390"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.406SE/2.0WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .406"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437/1.5WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .437"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437/27.0"

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .437"OD, 27.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SE/1.4WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .437"-.500"OD, 1.4" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SE/2.0WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .437"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SE/2.0WL-LF

Description: Universal Rotary Hole Probe Self Expanding from 0.437 inch (11.1mm) to 0.500 inch (12.7mm) diameter, 2 inch (50 mm) working length, Operating frequency 100KHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration....

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SE/2M

Description: UNIVERSAL ROTARY PROBE, 2MHz, SPLIT END, .437"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SS/0.75WL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"OD, 0.75" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SS/1.5WL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SS/2.0WL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SS/20MWL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"OD, 20mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SS/35MWL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"OD, 35mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SS/3WL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SS/51MWL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SS/65MWL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"OD, 65mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SS/70MWL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"OD, 70mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-.437SS/95MWL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"OD, 95mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-1.375SE/2.0WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, 1.375"-1.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-1.4375SE/2.0WL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, 1.437"-1.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-1.437SE/2.0WL/2M

Description: UNIVERSAL ROTARY PROBE, 1-3MHz, SPLIT END, 1.437"-1.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-11.1M

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .437"(11.1mm)OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-11.1M/SE

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .437"(11.1mm)-.476"(12.1mm)OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-11.1MSE/51MWL

Description: UNIVERSAL ROTARY PROBE, 100KHz-2MHz, SPLIT END, .437"(11.1mm)-.476"(12.1)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-11.1MSS/35MWL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"(11.1mm)OD, 35mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AUR-11.1MSS/50MWL

Description: STAINLESS STEEL ROTARY PROBE 100KHZ-2MHZ, .437"(11.1mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AURCS100-.437

Description: 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .437"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AURCS100-.437SS

Description: STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .437"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AURCS100-11.1M

Description: 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .437"(11.1mm)OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AURCS100-11.1MSS/50MWL

Description: STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .437"(11.1mm)OD TIP, 50mm WORKING LENGTH, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AURF-.437

Description: UNIVERSAL ROTARY PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPLIT END, .437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AURFB-.375SE/1.5WL

Description: UNIVERSAL FLAT BOTTOM ROTARY PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

*For Aircraft - This is not an exhaustive list. Many items in our system can be used on multiple aircraft.

Page 1

Next Page >>

Contact info

Link Footer

services

Request Items (0)

Go to Request