Tool Description: 0.020

Partial Match

Tool #

Description

In Stock

Our Sources

For Aircraft*

Photos

Add to Request

1260020

Description: Moore & Wright Feeler Strip 10 Piece, 0.020", 12"

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

15−5 PH

Description: Calibration reference standard 15−5 PH stainless steel containing 0.008 in. (0.20 mm)0.020 in. (0.51 mm) and 0.040 in. (1.02 mm) deep electrical discharge machined notches (Bombardier Inc. or equivalent)

In stock: 0

Sources: 1

For Aircraft*: CRJ 200
CRJ 700
CRJ 900
CRJ 1000

Photos:

20-540-1

Description: SPI® Countersink Gauges (Diameter: 0.020" to 0.170") (Countersink angle: 100°) (Add to cart: Add To Cart)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

20-541-9

Description: SPI® Countersink Gauges (Diameter: 0.020" to 0.170") (Countersink angle: 100°) (Add to cart: Add To Cart) (Diameter: 0.160" to 0.360") (Countersink angle: 100°) (Add to cart: Add To Cart)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

20-542-7

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

21200200

Description: BEARING RADIUS INSP PROBE: PROBE 0.020

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

8569K23

Description: TEFLON FILM THICK 0.020" 6"WIDE PRICE PER FT

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

962180-018

Description: BM-0,375-0.020-1B-1

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2030/MAG

Description: Surface reference standard, Magnesium, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3009

Description: CUSTOM BOLT HOLE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 7/32", 7/4", 9/32" CONTAINING 0.020" DEEP x .005" WIDE edm NOTCHES IN THE COUNTERSINK OF EACH HOLE. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3188

Description: 6 STEP WEDGE, 625 INCONEL. PAD SIZE: .787" x .787". STEP SIZES: 0.015", 0.020", 0.040", 0.063", 0.071", 0.100" +/-.001 TOLERANCE. Includes Test Report ancd Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3239AL

Description: 3 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM. HOLE SIZES: 1/4", 5/16", 3/8" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030". 3 EDM SURFACE NOTCHES 0.008", 0.020", 0.040". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3309AL

Description: Custom Thin Plate Surface Standard. 7075-T76 Aluminum 10.0" x 10.0" x .050". 3 Surface EDM Notches ±.001" on Width. 1.) 0.010" x 0.200" x .004"W 2.) 0.015" x 0.200" x .004"W 3.) 0.020" x 0.200" x .004"W. Includes Test Report and Certificate of Conform

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3338/17-4

Description: Surface reference standard, 17-4PH Steel, with EDM notch depths of 0.005", 0.010" and 0.020" inches +/-.001 (0.127mm, 0.254mm and .508mm), Notch Width: .004" +/-.001" Wide EDM notches, .005" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3410AL

Description: CUSTOM 5 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF 0.020", 0.040",0.060", .080", .100 +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3500/MAG

Description: Surface reference standard, Magnesium, with EDM notch depths of 0.008", 0.020", 0.030 and 0.040" inches (0.2mm, 0.51mm, 0.76mm and 1.02mm). Reference standard overall dImensions 1 X 5 X 0.25 inches (2.54cm X 12.7cm X 6.35mm). EDM notches .007" W MAX Inclu

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3504TI

Description: 12 HOLE REFERENCE STANDARD MANUFACTURED TO SPECIFICATION USAF T.O. 33-B-1-1. MATERIAL: 6AL-4V TITANIUM. HOLE SIZES: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/ 16" 5/8", 3/4" 0.020" x 0.004" +/-.001" Wide thru EDM NOTCHES. 4 tot...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT2054

Description: 10 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. Hole Sizes: 1/8”, 3/16”, ¼”, 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”. DEPTH: 0.5 +/- 0.05mm (0.020 +/- 0.002in) WIDTH: 0.1 +/- 0.05mm (0.004 +/- 0.002 in. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0812S

Description: Surface reference standard, 17-4PH Steel, with EDM notch depths of 0.008", 0.010" and 0.020" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inc

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824-7050

Description: Surface reference standard, 7050-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824-7050T74

Description: Surface reference standard, 7050-T74 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824-7075T6

Description: Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824-7075T7

Description: Surface reference standard, 7075-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0....

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824-7075T73

Description: Surface reference standard, 7075-T73 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824/2024T6

Description: Surface reference standard, 2024-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824/4330

Description: Surface reference standard, 4330 Steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inches

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824/6061T6

Description: Surface reference standard, 6061-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0....

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824/7475-T7

Description: Surface reference standard, 7475-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0....

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824A

Description: Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0....

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824I

Description: Surface reference standard, Inconel 718, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824M

Description: SURFACE REFERENCE STANDARD, MAGNESIUM AZ91E, WITH EDM NOTCH DEPTHS OF 0.008", 0.020" AND 0.040" INCH

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824S

Description: Surface reference standard, 4340 Steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inc...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824SS

Description: Surface reference standard, 304 Stainless steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM NOTCHES .005" W +/-.001"

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824SS/316

Description: Surface reference standard, 316 Stainless steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM NOTCHES .005" W +/-.001"

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-0824T

Description: Surface reference standard, 6AL-4v Titanium, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.2...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-1012HCS

Description: 12 HOLE REFERENCE STANDARD 4130 OR 4340 CARBON STEEL WITH 0.020" x 0.020" and 0.030" x 0.030" CORNER EDM NOTCH. HOLE SIZES: 1/8, 5/32, 3/16, 13/64, 7/32, 5/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ARS-1012HSA

Description: 12 HOLE REFERENCE STANDARD 7075-T6 WITH 0.020" x 0.020" and 0.030" x 0.030" CORNER EDM NOTCH. HOLE SIZES: 1/8, 5/32, 3/16, 13/64, 7/32, 5/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

BM20

Description: TOOL - INSTALLATION, SAFETY CABLE, 0.020 INCH DIA

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

BM202

Description: TOOL - INSTALLATION, SAFETY CABLE, 0.020 INCH DIA

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

CRES 17-4PH

Description: BOMBARDIER CHALLENGER EDDY CURRENT SURFACE BLOCK CRES 17-4PH STEEL. PART6 78-30-06 PAGE 27, 0.008", 0.020" and 0.040" EDM NOTCHES. Includes Certification Report Tracable to NIST.

In stock: 0

Sources: 2

For Aircraft*: N/A

Photos:

CRS 1 AL6061

Description: 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.020", 0.040", 0.060", 0.100", 0.150", 0.200" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

DLT05PSTU3004

Description: TUBE 0.250 X 0.020 X 12

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

FB14A020

Description: 0.020IN/0.508MM OFST 3IN BLD

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

FB1B020

Description: 0.020IN/0.508MM FLT 3IN BLD

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

FB3A020

Description: 0.018-0.020IN STPGND 3IN BLD

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

FB3A022

Description: 0.020-0.022IN STPGND 3IN BLD

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

FB6B020

Description: 0.020IN/0.508MM FLT 12IN BLD

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

H68-020

Description: LOCKWIRE 1 LB 0.020 SIZE

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

HL-7

Description: Baty HL-7 Lever Dial Test Indicator Range 0.020" Graduation 0.0005" Stylus Length 1.437" Bezel Dia 1 1/2"

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

HU25464

Description: SLAVE TAPER BOLL (0,508MM (0.020 IN) OVERSIZED)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

HU37874-1

Description: TAPER REAMER (0.020" O/S) (SR. NO. DCC200073-6-001)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

KSM0704

Description: 0.020" FEELER GAUGE ORANGE

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

NDT1039-0.016/0.020

Description: BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.020". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

NDT1039-0.020/0.025

Description: BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.020"/0.025". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

NDT1039-0.020/0.032

Description: BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.020"/0.032". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

PH13-8M0

Description: CALIBRATION REF. STANDARD, BLOCK, PH13-8 MO STEEL ALLOY, CONTAINS 0.008 IN(0.20 MM) 0.020 IN(0.51 MM) 0.040 IN(1.02 MM) DEEP ELEC DISCHARGE MACMACHINED NOTCHES

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

RADIUS PROBE

Description: RADIUS PROBE SET OF 0.030, 0.020, 0.015 AND 0.005

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

RM120-C30C20-2024T3

Description: 12 hole calibration standard, .030" corner notches, 3/16" to 3/4", 2024T3 Aluminum“2 corner notches 180 deg apart. 0.030’” upper surface and 0.020” on lower surface

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

RM120-C30C20-T6AL4V

Description: 12 hole calibration standard, .030" corner notches, 3/16" to 3/4", T6AL4V TI 2 corner notches 180 deg apart. 0.030’” upper surface and 0.020” on lower surface

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

RM200-T40-T6AL4V

Description: CALIBRATION REFERENCE STANDARD, TITANIUM ALLOY, CONDUCTIVITY 1.1 % IACS, CONTAINS 0.010 IN. (0.25 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP SURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, AND VARIOUS SIZE HOLES WITH 0.040-IN (1.02 MM) EDM NOTC

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

RM290-T20-2014T6

Description: multi-hole reference standard 29 holes 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 31/32, 11/16, 23/32, 3/4, 25/32, 13/16, 27/32, 7/8, 29/32 15/16, 31/32 0.020 deep through notch 3 surface flaws...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

RS0824-316

Description: SURFACE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST. STAINLESS STEEL (316) WITH EDM NOTCH DEPTHS OF 0.008, 0.020 AND 0.040 INCHES, BLOCK OVERALL DIMENSIONS 1 X 4 0.25 INCHES.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

RS0824-4340-VMS3RS-062

Description: Reference Standards are 3” Long x 2” Wide x ¼” Thick, 3 Surface EDM notches: 0.008” deep x 0.062” long, 0.020” deep x 0.062” long and 0.040” deep x 0.062” long

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

RS0824-T6AL4V

Description: EC REFERENCE STANDARD WITH CERTIFICATE, EDM NOTCH DEPTHS 0.008 INCH (0.203MM), 0.020 INCH (0.508MM) AND 0.040 INCH (1.016MM), TITANIUM 6AL-4V.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

RT8-2024T3-.020/.056

Description: 8 Step Wedge 2024T3 0.020,- 0.025,-0.030,-0.036,-0.040,-0.045,-0.050,-0.056 1"x1" pads, step tolerance of .0004"

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

RT8-7075T6-.020/.056

Description: 8 Step Wedge 7075T6 0.020,- 0.025,-0.030,-0.036,-0.040,-0.045,-0.050,-0.056 1"x1" pads, step tolerance of .0004"

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

SRS-0824M

Description: MAGNESIUM ALLOY 0.008 IN. 0.020 IN. 040 IN. NOTCH DEPTHS.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

TEK-6064

Description: Reference Std, 7075-T6, 1" Long, .030" radius on both sides, 1 EDM notch on each radius (1) 0.040”L x 0.020”D and (1) 0.020”Lx x0.020”D

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

TESA-01820009

Description: Tesa 01820009 - TAST Lever DTI ÃƒÆ’Ã†â€™Ãƒâ€¹Ã…â€œ1.5"/0.0005"/0-10-0, Range - 0.020"

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

WK3863309-3

Description: SHIM(0.020IN(0.50MM))

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

YA333O-20

Description: 0.020IN/0.508MM FB333O RPL BLD

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

*For Aircraft - This is not an exhaustive list. Many items in our system can be used on multiple aircraft.

Contact info

Link Footer

services

Request Items (0)

Go to Request